FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
28 SNMP Reference for Directors and Edge Switches
Enterprise-specific Invalid Attachment Trap
This trap is sent when an invalid attachment occurs (a device is attached, with a
World Wide Name WWN specifically disallowed by port binding). There is one
variable binding.
Enterprise-specific Threshold Alert Trap
This trap is sent when port traffic exceeds a specified threshold. There are two
variable bindings.
FA MIB Switch Status Change Trap
This trap is sent when the switch status changes. There are two variable bindings.
Binding OID Value
1 1.3.6.1.4.1.289.2.1.1.2.4.1.1.4.port_number
fcEosPortAttachedWWN.port_number
WWN of invalid attached device.
See definition for
“fcEosPortAttachedWWN” on
page 139.
Binding OID Value
1 1.3.6.1.4.1.289.2.1.1.2.3.1.1.1.port_number
fcEosPortIndex.port_number
Port number of port with
threshold alert.
2 1.3.6.1.4.1.289.2.1.1.2.6.1.1.1.threshold_number
fcEosTAIndex.threshold_number
The index of the threshold
which was triggered.
Binding OID Value
1 1.3.6.1.2.1.8888.1.1.3.1.6.<unit-id>
fcConnUnitStatus.<unit-id>
Where unit-id is the WWN of the switch
with 8 zeros appended for a total length of
16. Example:
1.2.3.4.5.6.7.8.0.0.0.0.0.0.0.0
Unit status. See definition for
“FcConnUnitStatus” on page 93.
2 1.3.6.1.2.1.8888.1.1.3.1.5.<unit-id>
fcConnUnitState.<unit-id>
Where unit-id is the WWN of the switch
with 8 zeros appended for a total length of
16. Example:
1.2.3.4.5.6.7.8.0.0.0.0.0.0.0.0
Unit state. See definition for
“FcConnUnitState” on page 92.