FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
66 SNMP Reference for Directors and Edge Switches
MIB objects defined in the Fabric Element MIB:
Module Table
A table that contains one entry for each module in the Fabric Element.
Fabric Element
MIB Object
Name
Type
Provide
d By
Access Description
fcFabricName FabricName PCP R The Name_Identifier of the Fabric to
which this Fabric Element belongs.
FcElementName FcNameId PCP R The Name_Identifier of the Fabric
Element.
FcFeModuleCapac
ity
FcFeModuleCap
acity
SNMP R The maximum number of modules in
the Fabric Element, regardless of
their current state.
Fabric Element
MIB Object
Name
Type Provided By
Acces
s
Description
fcFeModuleDescr DisplayStri
ng
(SIZE(256)
)
McK
DEV_TBL
R A textual description of the module. This
value should include the full name and
version identification of the module. It
should contain printable ASCII
characters.
This string should be derived from VPD
information stored in the FRU EEPROM.
FcFeModuleObje
ctID
OBJECT
IDENTIFIE
R
SNMP R The vendor’s authoritative identification
of the module. This value may be
allocated within the SMI enterprises
subtree (1.3.6.1.4.1) and provides a
straight-forward and unambiguous
means for determining what kind of
module is being managed. For example,
this object could take the value
1.3.6.1.4.1.99649.3.9 if vendor ’Neufe
Inc.’ was assigned the subtree
1.3.6.1.4.1.99649, and had assigned
the identifier 1.3.6.1.4.1.99649.3.9 to
its ‘FeFiFo-16 PlugInCard.
This is a fixed object identifier assigned
from the HP enterprise subtree
(1.3.6.1.4.1.289.2.1.1.2).