FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
68 SNMP Reference for Directors and Edge Switches
FxPort Configuration Table
A table that contains one entry for each FxPort in the Fabric Element and
configuration and service parameters of the FxPorts.
Fabric Element
MIB Object
Name
Type
Provid
ed By
Access Description
fcFxConfFxPortInd
ex
FcFeFxPortIndex SNMP R This object identifies the FxPort
within the module. This number
ranges from 1 to the value of
fcFeModulePortCapacity for the
associated module. The value
remains constant for the identified
FxPort until the module is
re-initialized.
This number ranges from 1 to
AS_glob.prod_cnfg_ptr->ports_per_
module.
FcFxPortName FcPortName PCP R The name identifier of this FxPort.
Each FxPort has a unique port name
within the address space of the
Fabric.
This is the WWN assigned to the
port.
FcFxPortFcphVersi
onHigh
FcphVersion FC2 R The highest or most recent version of
FC-PH that the FxPort is configured
to support. Since the switch is not
capable of changing its support for
FC-PH version, the version reported
is the one currently in use for this
port. If there is no device logged in,
then the value is 0.
If a device is logged in, the values
reported are:
6 = FC-PH 4.0
7 = FC-PH 4.1
8 = FC-PH 4.2
9 = FC-PH 4.3
0x10 = FC-PH2
0x20 = FC-PH3