FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
69SNMP Reference for Directors and Edge Switches
FcFxPortFcphVersi
onLow
FcphVersion FC2 R The lowest or earliest version of
FC-PH that the FxPort is configured
to support. Since the switch is not
capable of changing its support for
FC-PH version, the version reported
is the one currently in use for this
port. If there is no device logged in,
then the value is 0. For values see
“FcFxPortFcphVersionHigh” on
page 68.
FcFxPortBbCredit FcBbCredit PCP R The total number of receive buffers
available for holding Class 1
connect-request, Class 2 or 3 frames
from the attached NxPort. It is for
buffer-to-buffer flow control in the
direction from the attached NxPort
(if applicable) to Fport.
FcFxPortRxBufSize FcRxDataFieldSize LOGIN
SERVER
R The largest Data_Field Size (in
octets) for an FT_1 frame that can be
received by the FxPort.
This is fixed at 2112.
FcFxPortRatov MilliSeconds PCP R The Resource_Allocation_Timeout
Value configured for the FxPort. This
is used as the timeout value for
determining when to reuse an
NxPort resource such as a
Recovery_Qualifier. It represents
E_D_TOV (see next object) plus
twice the maximum time that a
frame may be delayed within the
Fabric and still be delivered.
FcFxPortEdtov MilliSeconds PCP R The E_D_TOV value configured for
the FxPort. The Error_Detect_Timeout
Value is used as the timeout value
for detecting an error condition.
FcFxPortCosSuppo
rted
FcCosCap SNMP R A value indicating the set of Classes
of Service supported by the FxPort.
This is fixed at CLASS_2 | CLASS_3
(0x0C).
fcFxPortIntermixSu
pported
INTEGER SNMP R A flag indicating whether or not the
FxPort supports an Intermixed
Dedicated Connection. The values
are defined as follows: yes(1) and
no(2).
This is fixed at no(2).