FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
70 SNMP Reference for Directors and Edge Switches
FcFxPortStackedC
onnMode
FcStackedConnMo
de
SNMP R A value indicating the mode of
Stacked Connect supported by the
FxPort.
This is fixed at none(1).
FcFxPortClass2Seq
Deliv
INTEGER SNMP R A flag indicating whether or not
Class 2 Sequential Delivery is
supported by the FxPort. The values
are defined as follows: yes(1) and
no(2).
This is fixed at yes(1).
FcFxPortClass3Seq
Deliv
INTEGER SNMP R A flag indicating whether or not
Class 3 Sequential Delivery is
supported by the FxPort. The values
are defined as follows: yes(1) and
no(2).
This is fixed at yes(1).
FcFxPortHoldTime MicroSeconds PCP R The maximum time (in
microseconds) that the FxPort shall
hold a frame before discarding the
frame if it is unable to deliver the
frame. The value 0 means that the
FxPort does not support this
parameter.
This is equal to quarter of E_D_TOV
which is obtained from PCP.
FcFxPortBaudRate Fc0BaudRate FPM R The FC-0 baud rate of the FxPort.
One of these values, or no value will
be returned.
0x10, 1 Gbaud (100 MB/s)
0x20, 2 Gbaud (200 MB/s)
0x40 4 Gbaud (400 MB/s)