FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
80 SNMP Reference for Directors and Edge Switches
Class 1 Accounting Table
A table that contains one entry for each FxPort in the Fabric Element, Class 1
accounting information. These entries are all zero, because class 1 is not
supported.
FcFxPortLinkR
esetOuts
Counter PSCC R The number of Link Reset Protocol issued by
this FxPort to the attached NxPort.
FcFxPortOlsIns Counter PSCC R The number of Offline Sequence received
by this FxPort.
FcFxPortOlsO
uts
Counter PSCC R The number of Offline Sequence issued by
this FxPort.
Fabric
Element MIB
Object
Name
Type
Provided
By
Access Description
fcFxPortC1Ac
ctFxPortIndex
FcFeFxPortInd
ex
SNMP R This object identifies the FxPort within the
module. This number ranges from 1 to the
value of fcFeModulePortCapacity for the
associated module. The value remains
constant for the identified FxPort until the
module is re-initialized.
This number ranges from 1 to
AS_glob.prod_cnfg_ptr->ports_per_modul
e.
FcFxPortC1In
Connections
Counter SNMP R The number of Class 1 connections
successfully established in which the
attached NxPort is the source of the
connect-request.
This value is fixed at 0.
FcFxPortC1O
utConnections
Counter SNMP R The number of Class 1 connections
successfully established in which the
attached NxPort is the destination of the
connect-request.
This value is fixed at 0.
FcFxPortC1Fb
syFrames
Counter SNMP R The number of F_BSY frames generated by
this FxPort against Class 1 connect-request.
This value is fixed at 0.