FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
84 SNMP Reference for Directors and Edge Switches
FxPort Capability Table
A table that contains one entry for each FxPort, the capabilities of the port within
the Fabric Element
Fabric
Element MIB
Object
Name
Type
Provided
By
Acces
s
Description
fcFxPortCapFx
PortIndex
FcFeFxPortInd
ex
SNMP R This object identifies the FxPort within the
module. This number ranges from 1 to the
value of fcFeModulePortCapacity for the
associated module. The value remains
constant for the identified FxPort until the
module is re-initialized.
This number ranges from 1 to
AS_glob.prod_cnfg_ptr->ports_per_modul
e.
FcFxPortCapF
cphVersionHi
gh
FcphVersion FC2 R The highest or most recent version of FC-PH
that the FxPort is capable of supporting. For
values see “FcFxPortFcphVersionHigh” on
page 68
FcFxPortCapF
cphVersionLo
w
FcphVersion FC2 R The lowest or earliest version of FC-PH that
the FxPort is capable of supporting. For
values see“FcFxPortFcphVersionHigh” on
page 68
FcFxPortCapB
bCreditMax
FcBbCredit SNMP R The maximum number of receive buffers
available for holding Class 1
connect-request, Class 2 or Class 3 frames
from the attached NxPort.
This value is fixed at 16.
FcFxPortCapB
bCreditMin
FcBbCredit SNMP R The minimum number of receive buffers
available for holding Class 1
connect-request, Class 2 or Class 3 frames
from the attached NxPort.
This value is fixed at 1.
FcFxPortCapR
xDataFieldSiz
eMax
FcRxDataField
Size
SNMP R The maximum size in bytes of the Data Field
in a frame that the FxPort is capable of
receiving from its attached NxPort.
This value is fixed at 2112.