FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
85SNMP Reference for Directors and Edge Switches
FcFxPortCapR
xDataFieldSiz
eMin
FcRxDataField
Size
SNMP R The minimum size in bytes of the Data Field
in a frame that the FxPort is capable of
receiving from its attached NxPort.
This value is fixed at 2112.
FcFxPortCapC
os
FcCosCap SNMP R A value indicating the set of Classes of
Service that the FxPort is capable of
supporting.
This value is fixed at CLASS_2 | CLASS_3
(0x0C).
fcFxPortCapInt
ermix
INTEGER SNMP R A flag indicating whether or not the FxPort
is capable of supporting the intermixing of
Class 2 and Class 3 frames during a Class
1 connection. This flag is valid only if the
port is capable of supporting Class 1
service. The values are defined as follows:
yes(1) and no(2).
This value is fixed no(2).
FcFxPortCapSt
ackedConnM
ode
FcStackedCon
nMode
SNMP R A value indicating the mode of Stacked
Connect request that the FxPort is capable
of supporting.
This value is fixed at none(1).
FcFxPortCapC
lass2SeqDeliv
INTEGER SNMP R A flag indicating whether or not the FxPort
is capable of supporting Class 2 Sequential
Delivery.
This value is fixed at yes(1).
FcFxPortCapC
lass3SeqDeliv
INTEGER SNMP R A flag indicating whether or not the FxPort
is capable of supporting Class 3 Sequential
Delivery.
This value is fixed at yes(1).
FcFxPortCapH
oldTimeMax
MicroSeconds SNMP R The maximum holding time (in
microseconds) that the FxPort is capable of
supporting.
This value is not supported. It’s always zero.