FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
89SNMP Reference for Directors and Edge Switches
Connectivity Unit Group
fcConnUnitTable
Contains general information on the system’s units
FA MIB
Object
Name
Type Value
Acces
s
Description
fcConnUnitNu
mber
INTEGER 1 R The number of connectivity units
present on this system. May be a
count of the boards in a chassis or
the number of full boxes in a rack.
FcConnURL DisplayString http://switch’s
IP-addr
R The top-level URL of the system. If it
does not exist, the value is an empty
string. The URL format is
implementation dependent and can
have keywords embedded that are
preceded by a percent sign (for
example,%USER).
The following are the defined
keywords that will be recognized and
replaced with data during a launch:
USER - replace with username
PASSWORD - replace with password
GLOBALID - replace with globalid
SERIALNO - replace with serial
number
A management application will read
this object from the MIB, provide
values for any of the keywords listed
above that are present in the string,
and then use the URL to invoke or
launch the program referenced.
FcConnUnitSn
sMaxRows
Unsigned32
(Same as
Gauge).
The number of
the entries of the
Name Server
Table.
R The maximum number of rows in the
fcConnUnitSnsTable table.