FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
93SNMP Reference for Directors and Edge Switches
FcConnUnitSt
atus
INTEGER This value will
be mapped
from current
status of switch
in such a way
that operational
status indicates
ok (3),
degraded status
indicates
warning (4),
failed status
indicates failed
(5).
R This object reports the overall status
of the connectivity unit. The warning
(4) value means that the connectivity
unit needs attention; all other values
are essentially self-explanatory. Any
of these values may occur with any
of the fcConnUnitState values
The values are defined as follows:
unknown (1), unused (2), ok (3),
warning(4), failed (5)
fcConnUnitPro
duct
SnmpAdminSt
ring
The oem
product name.
R The connectivity unit vendor’s
product model name.
FcConnUnitSe
rialNo
SnmpAdminSt
ring
OEM serial
number.
R The serial number identification for
this connectivity unit.
FcConnUnitU
pTime
TimeTicks R The number of centiseconds since the
last unit initialization.
FcConnUnitUr
l
DisplayString Same as
fcConnURL.
R/W URL to launch a management
application, if applicable. Otherwise
empty string. In a standalone unit,
this would be the same as the top
level URL. This has the same
definition as system URL for
keywords.
FcConnUnitD
omainId
OCTET
STRING (SIZE
(3))
FFCCXX
XX is the active
domainId of the
switch.
R 24 bit Fibre Channel address ID of
this connectivity unit. Following the
Fibre Channel standard, the
right-most bit of the right-most octet
is for the least significant bit of the
address value; the left-most bit of the
left-most octet, if needed, is for the
most significant bit of the address
value. If this value is not applicable,
all bits set to 1.
FcConnUnitPr
oxyMaster
INTEGER yes(3) R A value of ‘yes’ means this is the
proxy master unit for a set of
managed units. For example, this
could be the only unit with a
management card in it for a set of
units. A standalone unit should
return ‘yes’ for this object. The values
are defined as follows: unknown (1),
no (2), yes (3).