FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
94 SNMP Reference for Directors and Edge Switches
FcConnUnitPri
ncipal
INTEGER R Whether this connectivity unit is the
principal unit within the group of
fabric elements. If this value is not
applicable, return unknown. The
values are defined as follows:
unknown (1), no (2), yes (3).
FcConnUnitN
umSensors
Unsigned32 The number of
sensors.
RNumber of sensors in the
fcConnUnitSensorTable.
FcConnUnitN
umRevs
Unsigned32 1 R The number of revisions in the
fcConnUnitRevsTable.
FcConnUnitM
oduleId
OCTET
STRING(SIZE(
16))
return 16
zeros.(currently
not supported)
R This is a unique id, persistent
between boots, that can be used to
group a set of connectivity units
together into a module. The intended
use would be to create a connectivity
unit with an fcConnUnitType of
‘module’ to represent a physical or
logical group of connectivity units.
Then the members of the group
would set the value of fcConnUnitId
for this ‘container’ connectivity unit.
FcConnUnitModuleId should be
zeros if this connectivity unit is not
part of a module.
FcConnUnitN
ame
SnmpAdminSt
ring
switch’s
configured
name.
Writable and
persistent across
IPL.
R/W A name for this connectivity unit.
This object value should be persistent
between boots.
FcConnUnitInf
o
SnmpAdminSt
ring
A textual
description of
the product.
Writable and
persistent across
IPL.
R/W Information about this connectivity
unit. This object value should be
persistent between boots.