Installation Guide hp StorageWorks HA-Fabric Manager Appliance Product Version: FW v06.xx/HAFM SW v08.02.00 (July 2004) Second Edition Product Number: AA–RU5FB–TE/958–000324–001 This document provides instructions to perform initial setup and configuration of the HAFM appliance.
Copyright © 2003-2004 Hewlett-Packard Development Company, L.P.-NaN Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Table of Contents About This Guide . . . . . . . . . . . . . . . . . . . . . . . Overview . . . . . . . . . . . . . . . . . . . . . . . . Intended Audience . . . . . . . . . . . . . . . . . . . Related Documentation . . . . . . . . . . . . . . . . . Conventions . . . . . . . . . . . . . . . . . . . . . . . Document Conventions . . . . . . . . . . . . . . . . . Text Symbols . . . . . . . . . . . . . . . . . . . . . Equipment Symbols . . . . . . . . . . . . . . . . . . Rack Stability . . . . . . . . . . . . .
Configuring Appliance Names . . . . . . . . . . . . . . . . . . . Configuring Gateway and DNS Server Addresses . . . . . . . . . . . Configuring Windows 2000 Users . . . . . . . . . . . . . . . . . . . . Changing Default Administrator Password . . . . . . . . . . . . . . Adding a New User . . . . . . . . . . . . . . . . . . . . . . . Setting Appliance Date and Time . . . . . . . . . . . . . . . . . . . . Configuring and Enabling Event Notification Features . . . . . . . . . . . .
List of Figures 1.1. HAFM Appliance . . . . . . . . . . . . . . 1.2. HAFM Appliance front panel features . . . . . . 1.3. Mounting Brackets, Slide Rails, and Bar Nuts . . . 1.4. Hexagonal-Nut Standoff and Mounting Screws . . . 2.1. Three-Hole Bar Nut Alignment . . . . . . . . . 2.2. Front and Rear Bracket Assembly . . . . . . . . 2.3. Bracket Installation . . . . . . . . . . . . . . 2.4. Slide Rail Installation . . . . . . . . . . . . . 2.5. Appliance Installation . . . . . . . . . . . . . 2.6.
3.26. 3.27. 3.28. 3.29. 3.30. 3.31. 3.32. 3.33. 3.34. 3.35. 3.36. 3.37. 3.38. 3.39. 3.40. 3.41. 3.42. 3.43. 3.44. 3.45. VNC Authentication Screen . . . . . . . . . . . . Welcome to Windows dialog box . . . . . . . . . . Log On to Windows dialog box . . . . . . . . . . . System Properties dialog box (Network Identification Tab) Identification Changes dialog box . . . . . . . . . . Local Area Connection 2 Status dialog box . . . . . . Local Area Connection 2 Properties dialog box . . . .
List of Tables 1. Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 1.1. Factory-Set Defaults (HAFM Appliance) . . . . . . . . . . . . . . . . . . . . . . . .
About This Guide This installation guide provides information to help you: • Set up and connect the one rack unit (1U) high rack-mount HA-Fabric Manager (HAFM) appliance. • Configure HAFM appliance features. • Back up and restore the HAFM appliance. • Install the HAFM appliance and its slide-out shelf into a supported equipment cabinet. • Install or upgrade HAFM software. • Troubleshoot and resolve HAFM appliance and application problems.
About This Guide Intended Audience This book is intended for use by administrators and technicians who are experienced with the following: • Fibre Channel technology. • StorageWorks Fibre Channel switches by Hewlett-Packard. Related Documentation For a list of corresponding documentation, see the Related Documents section of the Release Notes that came with this product. For the latest information, documentation, and firmware releases, please visit the HP StorageWorks web site: http://h18006.www1.hp.
About This Guide Document Conventions The document conventions included in the Table 1table below apply in most cases. Table 1.
About This Guide Equipment Symbols The following equipment symbols may be found on hardware for which this guide pertains. They have the following meanings: Any enclosed surface or area of the equipment marked with these symbols indicates the presence of electrical shock hazards. Enclosed area contains no operator serviceable parts. WARNING: To reduce the risk of personal injury from electrical shock hazards, do not open this enclosure.
About This Guide Warning To reduce the risk of personal injury or damage to the equipment, be sure that: • The leveling jacks are extended to the floor. • The full weight of the rack rests on the leveling jacks. • In single rack installations, the stabilizing feet are attached to the rack. • In multiple rack installations, the racks are coupled. • Only one rack component is extended at any time. A rack may become unstable if more than one rack component is extended for any reason.
About This Guide HP Authorized Reseller For the name of your nearest HP authorized reseller: 14 • In the United States, call 1-800-345-1518 • In Canada, call 1-800-263-5868 • Elsewhere, see the HP Web site for locations and telephone numbers: http://www.hp.com.
Chapter 1. Initial Setup HAFM Appliance Description The HAFM appliance (Figure 1-1) is a one rack unit (1U) high rack-mount device with the High Availability Fabric Manager (HAFM) application installed. HAFM provides a graphical user interface (GUI) for operating and managing the Directors and Edge Switches. Figure 1.1. HAFM Appliance The HAFM appliance also includes a TightVNC Viewer version 1.2.
Chapter 1. Initial Setup Front Panel Figure 1-2 shows the HAFM appliance front panel indicators and controls. Figure 1.2.
Chapter 1. Initial Setup Factory Defaults Table 1-1 lists factory-set defaults for the HAFM appliance. Table 1.1.
Chapter 1. Initial Setup Kit Contents The fully-configured appliance is delivered with a: • HAFM appliance with the following minimum specifications: • Intel® Pentium® 4 processor with an 1,800 megahertz (MHz) or greater clock speed. • 1,024 megabyte (MB) or greater RAM. • 40 gigabyte (GB) or greater internal hard drive. • 1.44 MB 3.5-inch slim-type disk drive and slim-type compact disk-rewritable (CD-RW) drive. • 56K internal modem and modem adapter with RJ-11 connector.
Chapter 1. Initial Setup • • Ship group kit, containing: • HAFM appliance. • Ten (10) square alignment washers (required for rack-mounting in HP 9000, 10000 and 11000 series racks). • HAFM application CD-ROM. • HAFM boot/restore CD-ROM. • Norton AntiVirus CD-ROM. • Modem cable with RJ-11 connectors. • CD-RW (blank). • HAFM Release Notes. • 10–ft. Ethernet cable. • PDU power cord. • 110–volt AC power cord. • Null modem cable. • Modem phone cable.
Chapter 1. Initial Setup Figure 1.3. Mounting Brackets, Slide Rails, and Bar Nuts • Mounting screws: • Ten (10) pan-head Phillips screws (#10 x 1/2) with split lock and flat washers that secure the bracket assemblies to the vertical rack-mounting standards. • Ten (10) pan-head Phillips screws (M4 x 10 centimeter) with split lock and flat washers that secure the slide rails to the appliance.
Chapter 1. Initial Setup Figure 1.4.
Chapter 2. Installation The HAFM appliance can be installed in a customer-supplied cabinet as long as the following requirements are met: • The mounting standard-to-mounting standard cabinet depth must be from 18 inches to 32 inches to accommodate the rack mount kit. The HP rack mount kit must be used to install the appliance. • It is the customer’s responsibility to accurately calculate power requirements for the appliance and switches installed in the cabinet.
Chapter 2. Installation 2. 3. The depth of the equipment cabinet determines if the long rear mounting bracket or short rear mounting bracket is used. a. Using a tape measure (provided by installation personnel), measure and record the depth of the left side of the cabinet from the inside of the front vertical rack-mounting standard to the inside of the rear vertical rack-mounting standard. b.
Chapter 2. Installation Note Figure 2-1 depicts the right-side rails of the cabinet. This figure does not depict the square alignment washers required if you are installing the bar nuts in an HP 9000, 10000, or 11000 series cabinet. b. Attach each bar nut using two screws (first and third holes) per nut.
Chapter 2. Installation Figure 2.2. Front and Rear Bracket Assembly 5. 26 b. Partially tighten each screw so that the assembly is held together but not completely secure. This allows for slight adjustment of the bracket length during installation in the cabinet. c. Ensure the left and right bracket assembly lengths are equal to the cabinet depths recorded in step 2. Attach each bracket assembly to the rack-mounting standards as shown in Figure 2-3.
Chapter 2. Installation Figure 2.3. Bracket Installation a. Slide the mounting bracket flanges between the bar nuts and rack-mounting standards. Adjust the overall length of each bracket assembly if required. b. To allow tolerance for appliance installation, tighten the three-hole bar nut screws (bracket-to-rack mounting standard) so the brackets are stable, but can be moved laterally.
Chapter 2. Installation Figure 2.4. Slide Rail Installation Installing the Appliance To install the appliance in the equipment cabinet: 28 1. If the front bracket portions of the bracket assemblies are installed at the front of the cabinet (typical installation), install the server through the cabinet front. 2. While fully supporting the appliance, slide the appliance and attached slide rails into the mounting brackets as shown in Figure 2-5.
Chapter 2. Installation Figure 2.5. Appliance Installation 3. Using a #2 Phillips screwdriver, securely tighten the bar nut screws (four per assembly, eight total) that connect the bracket assemblies to the rack-mounting standards. 4. Install one hexagonal-nut standoff per side (two total) to prevent the appliance from moving. At the front of the appliance (as shown in Figure 2-6), screw a standoff through the remaining (center) hole where each three-hole bar nut attaches to the rack-mounting standard.
Chapter 2. Installation Figure 2.6. Install Hexagonal-Nut Standoffs and Securing Screws Note Figure 2-6 does not depict the square alignment washers required between the hexagonal-nut standoff and rack standard in an HP 9000, 10000, or 11000 series cabinet. Connecting the HAFM Appliance You can connect the HAFM appliance to the single customer-supplied corporate Ethernet LAN, with or without an HP-supplied Ethernet hub.
Chapter 2. Installation Caution Do not connect the HAFM appliance to a network that could expose HAFM to a virus until Norton AntiVirus software is installed. Norton AntiVirus software is included with the HAFM appliance. HP recommends the you connect a PC and the HAFM appliance on a private LAN to perform initial setup. After initial setup is completed, you can connect the HAFM appliance to your LAN. 1. Connect the appliance to the customer’s corporate intranet (public LAN interface).
Chapter 2. Installation 3. As shown in Figure 2-7, connect the phone cord to the left RJ-11 adapter (LINE) at the rear of the appliance and to a facility telephone connection. Powering On the HAFM Appliance To power on the HAFM appliance: Warning Use the supplied power cords. Ensure the facility power receptacle is the correct type, supplies the required voltage, and is properly grounded. 1.
Chapter 2. Installation • Virtual and physical memory capacity After successful boot and POST completion, the LCD panel displays a Welcome!! message. 2. Press the left edge (PUSH label) of the LCD panel to disengage the panel and expose the CD-RW drive. 3. Insert a blank rewritable CD into the CD-RW drive and close the LCD panel.
Chapter 3. Configuration Configuring Appliance Password and Network Addresses Verify the type of LAN installation with the customer’s network administrator. If the HAFM server or equipment cabinet is installed on a dedicated LAN, network information does not require change. Change the default password for the server’s LCD panel (if required by the customer), then go to Configuring Additional Appliance Information.
Chapter 3. Configuration Configuring LCD Panel Password To configure a new LCD panel password at the appliance: 1. At the LCD panel, press ENTER. The Welcome!! or operational information message changes to the following (Figure 3-1): Figure 3.1. LCD Panel (Password Entry) 2. Using the button to increment a digit, the button to decrement a digit, the button to move the cursor left, and the button to move the cursor right, input the default password (9999), then press ENTER.
Chapter 3. Configuration Configuring Public LAN Addresses Note Before starting this procedure, ensure that the LAN 1 interface is physically connected to the LAN. An LCD display of 0.0.0.0 indicates a physical LAN connection is not present. You can configure the public LAN connection (LAN 1) using one of the following methods: • Use Dynamic Host Control Protocol (DHCP) to assign the HAFM server IP address, subnet mask, and default gateway IP address.
Chapter 3. Configuration 3. Press ENTER and the following message displays (Figure 3-5) to allow the selection of DHCP. Figure 3.5. LCD Panel (DHCP selection) 4. Use the arrow keys as described in step 2 and select YES to use DHCP, then press ENTER. The following message displays (Figure 3-6): Figure 3.6. LCD Panel (Auto Get DNS) 5. Do one of the following: • Use the up and down arrow keys as described in step 2 to select YES, then press ENTER. The DNS address is auto-detected and recorded.
Chapter 3. Configuration 9. Record the private LAN IP address and subnet mask for reference if the appliance hard drive fails and must be restored. Manually Configuring Public LAN Addresses To configure TCP/IP network information for the private LAN connection (LAN 1): 1. At the LCD panel, press ENTER. The Welcome!! or operational information message changes to the following (Figure 3-9): Figure 3.9. LCD Panel (Password Entry) 2.
Chapter 3. Configuration 5. Use the arrow keys as described in step 2 to input a new subnet mask, then press ENTER. The following message displays (Figure 3-12) with an IP address whose first three octets (each three decimal digits) are the same as the IP address entered in step 5, and the last octet is set to decimal 254 (or the default gateway IP address of 0.0.0.0 is displayed). Figure 3.12. LCD Panel (Input Gateway) 6.
Chapter 3. Configuration You can configure the private LAN connection (LAN 2) using one of the following methods: • Use Dynamic Host Control Protocol (DHCP) to assign the HAFM server IP address, subnet mask, and default gateway IP address. You can either auto-detect or manually select the DNS server IP address. • Manually enter the HAFM server IP address, subnet mask, default gateway IP address, and DNS server IP address.
Chapter 3. Configuration 6. Do one of the following: • Use the up and down arrow keys as described in step 2 to select YES, then press ENTER. The DNS address is auto-detected and recorded. Proceed to step 8. • Select NO by pressing ENTER. The following message displays (Figure 3-18). Figure 3.18. LCD Panel (Input DNS) 7. Use the arrow keys as described in step 2 to enter the IP address for the DNS server, then press ENTER. The following message displays (Figure 3-19): Figure 3.19.
Chapter 3. Configuration 2. Using the button to increment a digit, the button to decrement a digit, the button to move the cursor left, and the button to move the cursor right, input the default password (9999), then press ENTER. The LAN 1 Setting?? message displays at the LCD panel. 3. Press the 4. Press ENTER and the following message displays (Figure 3-21) with the current LAN2 IP address. (The default is 10.1.1.1). button until the LAN 2 Setting?? message displays at the LCD panel. Figure 3.21.
Chapter 3. Configuration 8. Use the arrow keys as described in step 2 to enter the IP address for the DNS server, then press ENTER. The following message displays (Figure 3-25): Figure 3.25. LCD Panel (Save Change) 9. Use the up and down arrow keys as described in step 2 to select YES, then press ENTER. If you saved the changes, a Wait a moment!! message displays at the LCD panel and the LCD panel returns to the LAN 1 Setting?? message. 10.
Chapter 3. Configuration 2. At the PC browser, enter the IP address of the appliance for the LAN to which the PC is connected (LAN 1 or LAN 2), followed by :5800, as the Internet uniform resource locator (URL). Enter the URL in the following format: http://xxx.xxx.xxx.xxx:5800 Where xxx.xxx.xxx.xxx is the default IP address or the IP address configured while performing Configuring Appliance Password and Network Addresses. The VNC Authentication screen displays (Figure 3-26). Figure 3.26.
Chapter 3. Configuration Figure 3.27. Welcome to Windows dialog box 4. Click the Send Ctrl-Alt-Del button at the top of the window to log on to the appliance desktop. The Log On to Windows dialog box displays (Figure 3-28). Note Do not simultaneously press the Ctrl, Alt, and Delete keys. This action logs the user on to the browser-capable PC, not the appliance.
Chapter 3. Configuration Figure 3.28. Log On to Windows dialog box 5. Type the default Windows 2000 user name and password and click OK. The appliance’s Windows 2000 desktop opens. Note The default Windows 2000 user name is Administrator and the default password is password. Both are case-sensitive.
Chapter 3. Configuration Installing Anti-Virus Software A Norton AntiVirus software CD-ROM is included in the HAFM appliance kit contents to provide virus protection for the HAFM appliance. To install the anti-virus software: 1. At the front of the HAFM appliance, press the left edge (PUSH label) of the LCD panel to disengage the panel and expose the CD-RW drive. 2. Insert Norton AntiVirus software CD-ROM into the CD-RW drive and close the LCD panel. 3.
Chapter 3. Configuration Figure 3.29. System Properties dialog box (Network Identification Tab) 4. Click Properties. The Identification Changes dialog box displays (Figure 3-30).
Chapter 3. Configuration Figure 3.30. Identification Changes dialog box 50 5. At the Computer Name field, change the name to MGMTSERVER. 6. At the Workgroup field, change the name to WORKGROUP, then click OK. The dialog box closes. 7. Record the computer and workgroup names for reference if the appliance hard drive fails and must be restored. 8. At the System Properties dialog box, click OK to close the dialog box and return to the Control Panel window. 9.
Chapter 3. Configuration Configuring Gateway and DNS Server Addresses To configure gateway addresses and DNS server IP addresses for the private LAN connection (LAN 2) and public LAN connection (LAN 1): 1. At the Windows 2000 desktop, click Start at the left side of the task bar (bottom of the desktop), then select Settings, then Control Panel. The Control Panel window displays. 2. Double-click the Network and Dial-up Connections icon. The Network and Dial-up Connections window displays. 3.
Chapter 3. Configuration Figure 3.32. Local Area Connection 2 Properties dialog box 5. 52 Double-click the Internet Protocol (TCP/IP) entry. The Internet Protocol (TCP/IP) Properties dialog box displays (Figure 3-33).
Chapter 3. Configuration Figure 3.33. Internet Protocol (TCP/IP) Properties dialog box 6. The Use the following IP address radio button is enabled and the IP address and Subnet mask fields display network information configured while performing Configuring Appliance Password and Network Addresses. 7. At the Default gateway field, enter the gateway address obtained from the customer’s network administrator. 8. Select (enable) the Use the following DNS server addresses radio button.
Chapter 3. Configuration 10. Record the changed gateway and DNS server addresses for reference if the appliance hard drive fails and must be restored. 11. To configure addresses for the public LAN connection (LAN 1), double-click the Local Area Connection 1 icon and repeat step 4 through step 10 of this procedure. 12. Click close (X) at the upper right corner of the Network and Dial-up Connections window to return to the Windows 2000 desktop. 13. Reboot the appliance: a.
Chapter 3. Configuration Figure 3.34. Users and Passwords dialog box 3. The Guest user name is a built-in account in the Windows 2000 operating system and cannot be deleted. The srvacc account is for field service users and must not be modified or deleted. Changing Default Administrator Password To change the administrator password from the default (password) to a customer-specified password: 1. Click the Send Ctrl-Alt-Del button at the top of the window surrounding the Users and Passwords dialog box.
Chapter 3. Configuration Note Do not simultaneously press the Ctrl, Alt, and Delete keys. This action controls the browser-capable PC, not the HAFM appliance. Figure 3.35. Windows Security dialog box 2. 56 Click Change Password. The Change Password dialog box displays (Figure 3-36).
Chapter 3. Configuration Figure 3.36. Change Password dialog box 3. At the Old Password field, type the old password. At the New Password and Confirm New Password fields, type the new password. Note The New Password and Confirm New Password fields are case-sensitive. 4. Click OK. The default administrator password changes and the Change Password dialog box closes. 5. Click Cancel at the Windows Security dialog box to return to the Users and Passwords dialog box.
Chapter 3. Configuration Adding a New User To set up a new Windows 2000 user: 1. At the Users and Passwords dialog box, click Add. The first window of the Add New User wizard displays (Figure 3-37). Figure 3.37. Add New User Wizard (First Window) 2. 58 Type the appropriate new user information in the User name, Full name, and Description fields, then click Next. The second window of the Add New User wizard displays (Figure 3-38).
Chapter 3. Configuration Figure 3.38. Add New User Wizard (Second Window) 3. Type the new user’s password in the Password and Confirm password fields, then click Next. The third window of the Add New User wizard displays (Figure 3-39).
Chapter 3. Configuration Figure 3.39. Add New User Wizard (Third Window) 4. Based on the level of access to be granted, select the Standard user, Restricted user, or Other radio button. If the Other radio button is selected, choose the type of access from the adjacent list box. 5. Click Finish. The new user information is added and the wizard closes. Record the user information for reference if the appliance hard drive fails and must be restored. 6.
Chapter 3. Configuration Figure 3.40. Date/Time Properties dialog box (Date & Time Tab) Note The Time Zone field must be set before the Date & Time field. 3. Click the Time Zone tab. The Date/Time Properties dialog box displays with the Time Zone page open (Figure 3-41).
Chapter 3. Configuration Figure 3.41. Date/Time Properties dialog box (Time Zone Tab) 4. 62 To change the time zone: a. Select the appropriate time zone from the drop-down list at the top of the dialog box. b. If instructed by the customer’s system administrator, select the Automatically adjust clock for daylight saving changes check box. c. Click Apply. Record time zone and daylight savings information for reference if the appliance hard drive fails and must be restored. 5.
Chapter 3. Configuration e. Click Apply. Record date and time information for reference if the appliance hard drive fails and must be restored. 7. Click OK to close the Date/Time Properties dialog box. 8. Click close (X) at the upper right corner of the Control Panel window to return to the Windows 2000 desktop.
Chapter 3. Configuration Configuring the Call-Home via Dial-Out Feature The HAFM appliance has a call-home feature that provides automatic dial-out through the modem to a service support facility to report Director, Edge Switch, or HAFM appliance problems. The problem is logged into the support facility’s tracking system for resolution. Obtaining Required Information You must contact the nearest HP technical support location to obtain some required information prior to beginning this procedure.
Chapter 3. Configuration Configuring Call-home Feature The appliance has a call-home feature that provides automatic dial-out through the internal modem to a service support facility to report switch problems. The problem is logged into the support facility’s tracking system for resolution. To configure the call-home feature: 1. There are two jacks on the appliance’s internal modem: one for the call-home connection (LINE), and the other for a telephone (PHONE).
Chapter 3. Configuration 1. Log in to HAFM (see Accessing the Appliance Desktop. The HAFM main window displays, as shown in Figure 3-43. Figure 3.43. HAFM main window 2. 66 Select Monitor > Event Notification > Call Home.... The Call Home Event Notification Setup dialog box displays, as shown in Figure 3-44.
Chapter 3. Configuration Figure 3.44. Call Home Event Notification Setup dialog box 3. Place a check mark in the Enable Call Home Event Notification option. This enables the call-home function for the HAFM appliance, as well as for all Directors and Edge Switches that have also been enabled for call-home notification.
Chapter 3. Configuration Figure 3.45. Configure Identification dialog box 3. 68 Replace the default text with the following entries: • Name — Enter a name for this Director or Edge Switch as appropriate for your SAN. Click Set Name As Nickname, which will display a check mark in the box. This will be the name that will be displayed with the icon for this Director or Edge Switch in the HAFM Product View and Fabric View displays. • Description — Enter the address of your installation.
Chapter 3. Configuration Configuring Proactive Services Call Home via LAN Feature The HAFM appliance call-home via LAN feature provides automatic event notification to a support center for reporting Director or Edge Switch problems. In order to report events, this feature requires the HAFM appliance to have a valid LAN connection to a SANWorks Management Appliance or other server running the HP Proactive Services software.
Chapter 3. Configuration To enable the call-home feature on individual Directors and Edge Switches, perform the following for each Director and Edge Switch: 1. From the HAFM main window, open the Element Manager for the device. The Hardware View for the device is displayed. 2. Select Maintenance > Enable Call Home Notification. 3. Place a check mark in the Enable Call Home Event Notification option. 4. See Testing Remote Notification for instructions on testing the call-home feature.
Chapter 3. Configuration For information on configuring e-mail event notification, see hp StorageWorks HA-Fabric Manager User Guide.
Appendix A. Regulatory and Safety Information Use this publication if you are a trained installation and service representative experienced with appliances, storage area network (SAN) technology, and Fibre Channel director and switch technology. The product contains no serviceable parts that require internal access during normal operation or prescribed maintenance conditions.
Appendix A.
Appendix A. Regulatory and Safety Information place computers and related peripheral devices into two classes, A and B, depending upon their intended installation. Class A devices are those that may reasonably be expected to be installed in a business or commercial environment. Class B devices are those that may reasonably be expected to be installed in a residential environment (i.e., personal computers).
Appendix A. Regulatory and Safety Information Declaration of Conformity for Products Marked with FCC Logo—U.S. Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product, refer to http://www.hp.com.
Appendix A. Regulatory and Safety Information Canadian Notice (Avis Canadien) Class A Equipment This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Class B Equipment This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Appendix A. Regulatory and Safety Information • EN 55022 (CISPR 22) - Electromagnetic Interference • EN55024 (IEC61000-4-2, IEC61000-4-3, IEC61000-4- 4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8, IEC61000-4-11) - Electromagnetic Immunity • Power Quality: • EN61000-3-2 (IEC61000-3-2) - Power Line Harmonics • EN61000-3-3 (IEC61000-3-3) - Power Line Flicker • EN 60950 (IEC 60950) - Product Safety • Also approved under UL 1950, 3rd Edition/CSA C22.2 No.
Appendix A. Regulatory and Safety Information German Noise Declaration Schalldruckpegel Lp =64.4 dB(A) Am Arbeitsplatz (operator position) Normaler Betrieb (normal operation) Nach ISO 7779:1988 / EN 27779:1991 (Typprüfung) Electrostatic Discharge To prevent damage to the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices.
Appendix A. Regulatory and Safety Information Note For more information on static electricity, or assistance with product installation, contact your Authorized HP Reseller. FCC Part 68 Notice This notice is applicable to products fitted with USA modems. The modem complies with Part 68 of the FCC Rules. On this equipment is a label that contains, among other information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment.
Appendix A. Regulatory and Safety Information or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present are connected together. This precaution may be particularly important in rural areas.
Appendix A.
Appendix B. Tools Required Tools required to install the HAFM appliance and associated hardware include a: 83 • Door key with 5/16-inch socket (provided with the cabinet). • #2 Phillips screwdriver. • 5/16 open-end wrench. • Standard (7-inch) slip-joint pliers. • Standard (4-inch) diagonal side-cutter pliers.
Index Index A accessing appliance, 44 adding user, 58 C cables, FCC compliance statement; FCC compliance statement, cables, 76 call home configuring dial-out, 64 LAN, 69 testing, 70 Canadian notice, 77 CE marking, 77 changing administrator password, 55 configuring, 35 appliance name, 48 call home, 65 dial-out, 64 enabling dial-out, 65 enabling LAN, 69 LAN, 69 obtaining required information, 64 DNS server, 51 event notification 85
Index call home, 63 e-mail, 70 gateway, 51 identification, 67 LCD password, 36 private LAN, 40 manually, 42 using DHCP, 41 proactive services, 69 public LAN, 37 manually, 39 using DHCP, 37 Windows 2000 user, 54 connecting appliance, 30 power, 32 D declaration of conformity, 76, 81 DOC notice (Canadian), 80 document conventions, 11 E electrostatic discharge notice, 79 enabling call home dial-out, 65 LAN, 69 equipment symbols, 12 F FCC part 68 notice, 80 FCC: class B compliance notice, 75 G German noise
Index accessing, 44 factory defaults, 17 installing, 15 Norton AntiVirus, 48 help obtaining, 13 I installing appliance, 28 attaching brackets, 23 HAFM appliance, 23 Norton AntiVirus, 48 slide rails, 27 intended audience, 10 J Japanese notice, 78 K kit contents, 18 P proactive services, 69 R R&TTE directive, 81 regulatory compliance notices, 73 related documentation, 10 S setting date, 60 time, 60 symbols in text, 11 T Taiwanese notice, 78 testing remote notification 87
Index call home, 70 text symbols, 11 88