FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

Zoning136
The Replace Zone Member dialog box appears (Figure 85).
Figure 85 Replace Zone Member dialog box
3. Enter the domain and port IDs or the WWN of the replacement member.
4. Click OK.
Copying a zone set
To copy a zone set:
1. Display the zone library. (See ”Displaying the zone library” on page 127.)
The Zoning dialog box appears (Figure 78).
2. Right-click the zone set that you want to copy.
•Select Duplicate to copy the zone set.
The copied zone set appears.
3. Optionally, enter a new name for the zone set. (See ”Replacing zone members” on page 135.)
4. Click OK.
Deleting a zone
1. Display the zone library. (See “Displaying the zone library” on page 177).
The Zoning dialog box appears (Figure 78).
2. Right-click the zone you want to delete and select Delete.
NOTE: The zone is deleted without confirmation. If you delete a zone accidentally, click Cancel
instead of OK to restore it.
3. Click OK.
Deleting a zone set
1. Display the zone library. (See ”Displaying the zone library” on page 127.)
The Zoning dialog box appears (Figure 78).
2. Right-click the zone set you want to delete and select Delete.
NOTE: The zone set is deleted without confirmation. If you delete a zone set accidentally, click
Cancel instead of OK to restore it.