FW V06.XX/HAFM SW V08.02.00 HP StorageWorks HA-Fabric Manager Appliance Installation Guide (AA-RU5FB-TE, July 2004)

Chapter 1. Initial Setup
Figure 1.3. Mounting Brackets, Slide Rails, and Bar Nuts
• Mounting screws:
• Ten (10) pan-head Phillips screws (#10 x 1/2) with split lock and flat washers that
secure the bracket assemblies to the vertical rack-mounting standards.
• Ten (10) pan-head Phillips screws (M4 x 10 centimeter) with split lock and flat washers
that secure the slide rails to the appliance.
• Four (4) flat-head Phillips machine screws (#8 x 7/16) that secure the two-hole bar
nuts, front brackets, and rear brackets.
• Two (2) hexagonal-nut standoffs.
Figure 1-4 illustrates the standoff and mounting screws.
20
hp StorageWorks HA-Fabric Ma nager Appliance Installation
Guide