FW V06.XX/HAFM SW V08.02.00 HP StorageWorks HA-Fabric Manager Appliance Installation Guide (AA-RU5FB-TE, July 2004)

Chapter 2.
Installation
The HAFM appliance can be installed in a customer-supplied cabinet as long as the following
require
ments are met:
• The mounting standard-to-mounting standard cabinet depth must be from 18 inches to
32 inches to accommodate the rack mount kit. The HP rack mount kit must be used
to install the appliance.
• It is the customer’s responsibility to accurately calculate power requirements for the
appliance and switches installed in the cabinet. HP is not responsible for power-related
problems resulting from equipment installed in a customer-supplied cabinet.
Installing the HAFM Appliance
Perform the following to install the HAFM appliance in the cabinet:
• Assemble and attach the front and rear brackets to the cabinet.
• Attach the left and right slide rails to the appliance.
• Install the appliance in the cabinet.
• If you are not installing the HAFM appliance in a cabinet, go to Connecting the
HAFM Appliance.
Attaching Front and Rear Brackets
To assemble the front and rear brackets and attach the assemblies to the cabinet:
1. Consult with the customer and determine the cabinet installation positi
on for the
appliance. The appliance is 1.75 inches or one rack unit (1U) high.
23
hp StorageWorks HA-F abric Manager Appliance Installation
Guide