FW V06.XX/HAFM SW V08.02.00 HP StorageWorks HA-Fabric Manager Appliance Installation Guide (AA-RU5FB-TE, July 2004)

Chapter 3. Configuration
9. Record the pri
vate LAN IP address and subnet mask for reference if the appliance hard
drive fails and must be restored.
Manually Conf
iguring Public LAN Addresses
To configure T
CP/IP network information for the private LAN connection (LAN 1):
1.
At the LCD panel, press ENTER. The Welcome!! or operational information message
changes to the following (Figure 3-9):
Figure 3.9. LCD Panel (Password Entry)
2. Using the b
utton to increment a digit, the
button to decrement a digit, the button
to move the
cursor left, and the
button to move the cursor right, input the default
password (9999), then press ENTER.TheLAN 1 Setting?? message displays
at the LCD panel.
3.
Press ENTER and the following message displays (Figure 3-10) with the current LAN1
IP address. (The default is 192.168.0.1).
Figure 3.10. LCD Panel (LAN 1 IP Address)
4.
Use the arrow keys as described in step 2 to input a new IP address, then press ENTER.
The foll
owing message displays (Figure 3-11) with the current subnet mask. (The
default subnet mask is 255.0.0.0).
Figure 3.11. LCD Panel (Input Netmask)
hp StorageWorks HA-F abric Manager A ppl iance Installation
Guide
39