FW 05.01.00 and SW 07.01.00 HP StorageWorks SAN High Availability Planning Guide (AA-RS2DC-TE, June 2003)

Product Management
55SAN High Availability Planning Guide
■ Monitor port status, port statistics, and the active zone set, and display the
event log and node list.
■ Perform product firmware upgrades and port diagnostics, reset ports, enable
port beaconing, and set the product online or offline.
The EWS interface can be opened from a standard Web browser running Netscape
Navigator 4.6 or higher or Microsoft Internet Explorer 4.0 or higher. At the
browser, enter the IP address of the product as the Internet uniform resource
locator (URL). When prompted at a login screen, enter a user name and password.
The default administrator-level user name is Administrator. The default
operator-level user name is Operator. The default password for both is
password.
When the interface opens, the default display is the View panel (Figure 20 on
page 55). The View panel for the Director 2/64 is shown as an example.
Figure 20: View Panel (Embedded Web Server interface)
Task selection tabs display at the top of the panel, a graphical representation of
product hardware (front and rear) displays at the right side of the panel, and menu
selections (View, Configure, Monitor, Operations, and Help) display at the left
side of the panel. The task selection tabs allow users to perform director or
switch-specific tasks.