FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
114 SNMP Reference for Directors and Edge Switches
FcConnUnitLin
kPortWwnX
OCTET
STRING
The local side port WWN on
the link. This information is
available for both E and
F_Ports.
R The port WWN of the unit
specified by
fcConnUnitLinkNodeIdX if
known, otherwise 16 octets
of binary 0.
FcConnUnitLin
kNodeIdY
OCTET
STRING
(SIZE(16))
The attached node WWN
on the link. This information
is available for E_Ports and
F_Ports. E port nodeIdY can
be retrieved from RNID, F
port NodeIdY is supported
by FLOGI.
R The node WWN of the unit
at the other end of the link. If
the node WWN is unknown
and the node is an
fcConnUnit in the
responding SNMP agent
then the value of this object
must be equal to its
fcConnUnitId.
FcConnUnitLin
kPortNumber
Y
Integer32 The attached port number on
the link. This information is
available only for E_Ports
from ISR. For F port, -1 is
returned.
R The port number on the unit
specified by
fcConnUnitLinkNodeIdY if
known, otherwise –1. If the
value is non-negative then it
will be equal to
fcConnUnitPortPhysicalNum
ber.
FcConnUnitLin
kPortWwnY
OCTET
STRING
The attached port WWN on
the link. For E_Ports, returns
the WWN of the connected
switch.
R The port WWN on the unit
specified by
fcConnUnitLinkNodeIdY if
known, otherwise 16 octets
of binary 0.
FcConnUnitLin
kAgentAddres
sY
OCTET
STRING
(SIZE(16))
R The address of an FCMGMT
MIB agent for the node
identified by
fcConnUnitLinkNodeIdY, if
known; otherwise 16 octets
of binary 0.
FcConnUnitLin
kAgentAddres
sTypeY
Unsigned
32
RIf
fcConnUnitLinkAgentAddress
Y is non-zero, then it is a
protocol address.
FcConnUnitLinkAgentAddres
sTypeY is the ‘address family
number’ assigned by IANA
to identify the address
format. (for example, 1 is
Ipv4, 2 is Ipv6).