FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
72 SNMP Reference for Directors and Edge Switches
FxPort Operation Table
A table that contains, one entry for each FxPort in the Fabric Element, operational
status and parameters of the FxPorts.
Fabric Element
MIB Object
Name
Type
Provid
ed By
Access Description
fcFxPortOperFxPor
tIndex
FcFeFxPortInd
ex
SNMP R This object identifies the FxPort within the
module. This number ranges from 1 to
the value of fcFeModulePortCapacity for
the associated module. The value
remains constant for the identified FxPort
until the module is re-initialized.
This number ranges from 1 to
AS_glob.prod_cnfg_ptr->ports_per_mo
dule.
FcFxPortID FcAddressId Login
Server
R The address identifier by which this
FxPort is identified within the Fabric. The
FxPort may assign its address identifier
to its attached NxPort(s) during Fabric
Login.
Return a port id if the port is logged into
the fabric, otherwise this address is
000000 in FCEOS.
fcFPortAttachedPor
tName
FcPortName Login
Server
R The port name of the attached N_Port, if
applicable. If the value of this object is
‘0000000000000000’H, this F_Port
has no NxPort attached to it. This
variable has been deprecated and may
be implemented for backward
compatibility. Not supported for NL
ports.
FcFPortConnected
Port
FcAddressId SNMP R The address identifier of the destination
FxPort with which this FxPort is currently
engaged in a either a Class 1 or loop
connection. If the value of this object is
‘000000’H, this FxPort is not engaged in
a class 1 connection. This variable has
been deprecated and may be
implemented for backward
compatibility.
This address is fixed at 0x000000.