FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
91SNMP Reference for Directors and Edge Switches
FcConnUnitGl
obalId
FcGlobalId Switch’s WWN. R An optional global-scope identifier
for this connectivity unit. It
must be a
WWN for this connectivity unit or
16 octets of value zero.
WWN formats requiring fewer than
16 octets
must be extended to 16
octets with trailing zero octets. If a
WWN is used for fcConnUnitId, the
same WWN
must be used for
fcConnUnitGlobalId.
When a non-zero value is provided,
it
should be persistent across agent
and unit resets. It
should be globally
unique. It
should be one of these
FC-PH/PH3 formats:
IEEE (NAA=1)
IEEE Extended (NAA=2)
IEEE Registered (NAA=5).
IEEE Registered extended (NAA=6).
Use of the IEEE formats allows any
IEEE-registered vendor to assure
global uniqueness independently.
The following are some references on
IEEE WWN formats:
http://standar ds.ieee.org/regauth/oui/
tutor i als/fibreform a t.html
http://standards.ieee.org/regauth/
oui/tutorials/fibrecomp_id.html