McDATA 4Gb SAN Switch for HP p-Class BladeSystem User Guide (AA-RW20B-TE, December 2005)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 15
Perform one of the following procedures to access and begin managing the switch:
• Select Open Existing Fabric to open the Add a New Fabric dialog, which prompts you for a fabric
name, IP address, account name, and password. See ”Adding a fabric” on page 40.
• Select Start Application Without Specifying a Fabric to open the McDATA Web Server window shown
in Figure 2. Click Add to open the Add a New Fabric dialog, which prompts you for a fabric name, IP
address, account name, and password. See ”Adding a fabric” on page 40.
Figure 2 McDATA Web Server window
Starting McDATA Element Manager in HAFM
To use McDATA Element Manager, the HAFM client application must be running on your workstation, or
you must be accessing HAFM on the HAFM Appliance. See your HAFM documentation for information
about starting and using HAFM. To start McDATA Element Managet in HAFM, add the switch IP address to
the discovery list. Locate and double click the switch in the fabric map to open. You can also select the
switch and select Element Manager from the application list. HAFM displays the Element Manager window
shown in Figure 3.
Figure 3 McDATA Element Manager Window