hp SANworks Application Note – Storage Allocation Reporter V1.0D SP2 Part Number: AA-RS2RD-TE Fourth Edition December 2002 Service Pack 2 (SP2) for Storage Allocation Reporter is available as a Web download. This Service Pack download is for existing SAR customers who intend to update their Management Appliance to Storage Management Appliance software Version 2.0 and wish to continue using SAR. The installation instructions are included with the Service Pack download.
© Hewlett-Packard Company, 2002. All rights reserved. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright.
Application Notes Contents Application Notes Contents These Application Notes cover the following major topics: • “V1.0D SP2 Network Installation Requirements,” page 4 — Management Appliance System Requirements, page 4 — Internet Browser Requirements, page 4 — SAR Version Requirement, page 4 • “V1.0D SP2 Network Installation Instructions,” page 4 — Option A: Appliance Install, page 4 — Option B: File Transfer Protocol, page 5 • V1.
V1.0D SP2 Network Installation Requirements V1.0D SP2 Network Installation Requirements Management Appliance System Requirements hp Openview Storage Management Appliance software V2.0. Internet Browser Requirements Install Storage Allocation Reporter V1.0D SP2 from a client computer running Microsoft Internet Explorer. SAR Version Requirement Storage Allocation Reporter V1.0D or V10.D SP1 (previously installed on hp OpenView Storage Management Appliance software V1.
V1.0D SP2 Network Installation Instructions 7. From the Management Appliance, verify you have Client for Microsoft Networks (Start>Settings>Network and Dial-Up Connections, right click on Local Area Connection and Properties), then connect to the share drive that contains Storage_Allocation_Reporter_V10D_SP2.swp 8. Copy the above file from the share into the following directory on the Management Appliance C:\COMPAQ\SWPInstallKits 9. Disconnect from the file share drive. Log off Terminal Services. 10.
V1.0D SP2 Network Installation Instructions 3. Copy Storage_Allocation_Reporter_V10D_SP2.swp in the SANworks folder on the FTP server. 4. From a client computer, launch Internet Explorer and browse to the Management Appliance splash page at http://:2301. 5. Browse to the hp OpenView Storage Management Appliance home page. 6. Click on the Settings link on the toolbar at the top of the home page. The Settings page is displayed. 7. Click on the Maintenance link. The Maintenance page opens. 8.
V1.0D SP2 Description V1.0D SP2 Description This section describes the SANworks Storage Allocation Reporter V1.0D SP2. SANworks Storage Allocation Reporter V1.0D SP2 requires Storage Allocation Reporter V1.0D or V10.D SP1 and hp Openview Storage Management Appliance software V2.0 to be present on the Management Appliance. Storage Allocation Reporter V1.0D or V10.D SP1 must be installed prior to the Management Appliance V2.0 install. The new features in Storage Allocation Reporter V1.
Known Issues and Workarounds Removing SAR Use caution before removing SAR from your Management Appliance because you cannot reinstall SAR V1.0D on the Management Appliance software V2.0. CAUTION: If you remove SAR and wish to reinstall it, you must return your Storage Management Appliance software to V1.0C and reinstall SAR V1.0D. Be certain that this is what you intend to do, as you must reinstall the Management Appliance Software V1.0C and reconstruct all settings.
Known Issues and Workarounds Alliance Restore to a Different Appliance Problem: When performing a Restore from a backup to a different Appliance, SAR does not launch on the restored Appliance. Solution: After Restore is complete, the DSN points to the old database. A problem will occur if Restore is performed from a backup to a different Appliance. If the backup is from Appliance A, and the Restore is performed on Appliance A, then there is no Restore problem.
