HP OpenView Storage Management Appliance I Quickrestore CD Instructinos (AV-RUCVB-TE, October 2003)

English
Page 9
A verification screen is displayed (see Figure 7).
Figure 7: Time setting verification screen
9. Verify whether the time displayed is correct:
■ If the time displayed is correct, press the Y key.
■ If the time displayed is not correct, press the N key, enter the current time, and press the Enter
key. (See step 8 for the entry format.)
Note: The system always requests that you verify the time entered.
After the date and time are entered and verified, the SMA I automatically begins hardware
configurations. This process takes approximately four minutes to complete.
Caution: During this hardware configuration process, a series of screens is displayed. To
avoid damaging the SMA I, HP recommends that you do not interrupt this process at any time
by pressing keyboard keys or SMA I buttons. Allow the QuickRestore to complete hardware
configurations. After the QuickRestore process is complete, the SMA I automatically ejects the
QuickRestore CD.
storage management appliance QuickRestore
*********************************************************************
Verify the new time.
Current time is 11:21:14.50a
(Y)es - The time is correct.
(N)o - The time is not correct.