HP OpenView Storage Mirroring High Availability for Exchange Server 2000/2003 Application Notes (May 2005, T2558-88020)

Storage Mirroring High availability for Exchange Server 2000/2003 application notes 15
4. Change the source IP address to the target's assumed IP address. This is the source's original IP
address before it failed.
5. Verify that the target is disconnected from the network, then connect the source to the network.
NOTE: You can automate steps 6-13 and avoid rebooting by running the following two commands in a
script file. Netdom is included in the Windows 200x Support Tools, found in the Support directory on the
Windows 200x CD. This utility allows you to add a machine into a domain. Modify the commands to fit
the names used in your environment.
netdom join source_server_name /Domain:domain_name /UserD:user_name
/PasswordD:password
runas /user:user_name "cd_drive:\setup\i386\setup.exe /DisasterRecovery"
If you choose to automate steps 6-13, continue with step 14.
6. On the source, right-click My Computer and select Properties.
7. Select the Network Identification tab and click Properties.
8. Under Member of, change to Domain and specify the domain name.
9. Click OK.
10.When you are prompted for a domain account, specify an account with permissions to add a
workstation to the domain.
Repaired Source Target Standing in for Source
Windows member server
Disconnected
with unique name and IP address
Disconnected
changed to match target
Repaired Source Target Standing in for Source
Windows member server
with unique name and IP address
Disconnected
changed to match target