HP OpenView Storage Mirroring High Availability for Exchange Server 2000/2003 Application Notes (May 2005, T2558-88020)

Storage Mirroring High availability for Exchange Server 2000/2003 application notes 17
18.Install any Exchange service packs or patches.
19.Install Storage Mirroring, if necessary.
20.Remove the rebuilt source from the network.
21.Reconnect the target to the network.
22.Continue to the next section, ”Recovering to the original source”, to restore the data from the target
back to the source.
Recovering to the original source
1. Stop all of the Exchange services on the source so that you can overwrite the data with the newer data
on the target. The services must be stopped in the order identified in the pre-failback script. See
”PreBack.BAT” on page 11.
NOTE: If the services do not stop, you can manually terminate the processes through the Task Manager.
2. On the target, open the Failover Control Center (Start, Programs, Storage Mirroring, Failover Control
Center).
Repaired Source Target Standing in for Source
Windows member server
with unique name and IP address
Disconnected
changed to match target
Domain Member
Exchange
Storage Mirroring
Repaired Source Target Standing in for Source
Windows member server
with unique name and IP address
Disconnected
changed to match target
Disconnected
Exchange
Storage Mirroring
Repaired Source Target Standing in for Source
Windows member server
with unique name and IP address
changed to match target
Disconnected
Exchange
Storage Mirroring