HP P6000 Command View Suite 10.3 Release Notes (T5494-96584)

Storage volume creation and mounting was not successful.
Reason: The storage volume you created has not been detected. (7007,
blm_storage_volume_not_found)
This error occurs when the host on which you attempted to create the storage volume cannot connect
to the array through the fabric. Other management operations succeed because they use connections
to HP P6000 Command View over Ethernet.
To resolve this situation, verify the zone configuration of the switch.
javaw.exe – Unable to locate component error
During HP P6000 Command View installation, the following error message can appear:
javaw.exe - Unable To Locate Component; This application has failed to
start because WINSPOOL.DRV was not found. Re-installing the application
may fix this problem.
This error occurs when the HP P6000 Command View installer attempts to create desktop icons
for the applications that it installed.
Because the error occurs after HP P6000 Command View installed all applications, you do not
need to reinstall the applications. To continue, click OK.
If the desktop shortcuts do not appear, you can create them manually. Common executable files
and shortcuts are located as follows:
C:\Program Files\Hewlett-Packard\Sanworks\Element Manager
for StorageWorks HSV\sssu.exe
HP Storage System Scripting Utility
https://localhost:2374HP P6000 Command View
C:\Program Files\Hewlett-Packard\EVA Performance Monitor\
evaperf.exe
HP P6000 Performance Data
Collector
Related documentation
Documentation for HP P6000 SmartStart for Windows is located on the HP P6000 SW Suite
CV/SmartStart/SSSU/Docs 10.3 DVD in the documentation folder.
Documentation for HP P6000 SmartStart for Linux is located on the HP P6000 SmartStart SW for
Linux CD.
You can also access all the documentation referenced in this document from the Manuals page of
the HP Business Support Center website http://www.hp.com/support/manuals. In the Storage
section, click Storage Software, and then select your product. For array-specific documents, click
Disk Storage Systems, and then select your array model.
Starting HP P6000 SmartStart for Linux
To start HP P6000 SmartStart for Linux:
1. Insert the HP P6000 SmartStart SW for Linux CD in the CD drive of the server you want to
configure.
2. Create a mount folder for the disk.
For example, mkdir /mnt/cdrom.
3. Mount the disk.
For example, mount -t iso9660 -o ro /dev/cdrom /mnt/cdrom.
4. Change the current directory to the application directory.
For example, cd /mnt/cdrom/app.
5. Run the HP P6000 SmartStart executable script as follows: ./P6000SmartStart
16