HP EVAInfo Release Notes HP Part Number: T5494-96552 Published: October 2012 Edition: 1
© Copyright 2012 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Version: 10.2 Description HP EVAInfo is a command line utility developed for the HP P6000 Enterprise Virtual Array (EVA). It maps device special files to logical unit numbers (LUNs) presented from the EVA to the server or host and the associated port and array controller on the EVA. This document applies to HP EVAInfo Version 10.2. NOTE: DVD. HP EVAInfo is distributed on the HP P6000 SW Suite CV/SmartStart/SSSU/Docs 10.
Table 1 Supported operating systems (continued) Operating system Build name Red Hat Linux AS and ES 5 (Itanium) Update 5 evainfo_LINUX64_ITANIUM SUSE Linux Enterprise Server 10.0 (x86 32-bit) SP3 evainfo_LINUX_INTEL SUSE Linux Enterprise Server 10.0 (x64 64-bit) SP3 evainfo_LINUX_AMD64 SUSE Linux Enterprise Server 10.0 (Itanium) SP3 evainfo_LINUX64_ITANIUM SUSE Linux Enterprise Server 11.0 (x86 32-bit) SP1 evainfo_LINUX_INTEL SUSE Linux Enterprise Server 11.
Option Description -W Display device paths based on the LUN WWN. -w wwn Display information for the LUN with the specified WWN. Format options Option Description -f format Display information in the specified format. The supported format values are tab (default) and csv (comma-separated values). nl -l Display information in long format, including all details1 about the LUN. -u unit Display capacity in the specified unit. The supported unit values are KB, MB (the default), and GB.
• HP recommends that you use the HP EVAInfo binary evainfo_HPUX_11.11_PARISC for hosts running HP-UX 11.23 PA-RISC and HP-UX 11.23 IA 64. • HP EVAInfo ignores invalid parameters entered with options –a ,–W, –p, and –P . Commands Table 2 (page 6) provides examples of commands executed from an HP-UX 11.23 system. Table 2 HP-UX command examples To obtain: Command example: Usage information # ./evainfo-hpux_v11.23 -h Version # ./evainfo-hpux_v11.23 -v A list of all LUNs # ./evainfo-hpux_v11.
/dev/rdsk/c231t15d7 5000-1FE1-5002-E1B0 6005-08B4-0010-2AB1-0000-F000-0053-0000 10240MB Ctl-B/FP-2/NonOptimized Red Hat Enterprise Linux example # .
