HP StorageWorks EVA Hardware Providers administration guide Windows 2003 (T1634-96054, August 2006)

Configuring the EVA disk array
The following configuration steps are required for both V DS and VSS Hardware Providers. The current
HWPs work with EVA Command View 6.0 or higher.
1. For the HWPs t
o access the C V server, you must create new user names and user groups at the
operating system level on the CV server. In Windows, click Start > Control Panel > User Accounts.
2. Create the following two user groups:
Group
Description
HP Storage Users
Members can look at storage but cannot make changes
HP Storage Administrators
Members ca
n use CV/EVA for all storage management tasks
3. Still in User A ccounts, cre ate new users within the new user groups. For example, you might
create the following users:
User Acco
unt
Group
Hpuser
HP Storage Users
Hpadmin HP Storage Administrators
HWP user
smustloginasoneoftheseusersbeforeperformingVDS/VSSoperationsusingthe
HWP con
figuration utility.
4. Start E
VA Command View and log into it using one of the user accounts you just created.
HP StorageWorks EVA Hardware Providers administration guide
23