HP StorageWorks Management Pack for System Center Operations Manager 2007 Installation and User Guide

NOTE:
The SNMP Trap Catcher receives traps from Virtual Array management software (Command View
SDM), Tape Library Management Software (Command View TL), and XP Disk Array Management
software, (Command View XP) and processes the OpsMgr 2007 events.
Using SNMP to directly monitor P2000/MSA events
Monitoring SNMP traps for MSA 1000 and 1500 series arrays
To monitor MSA 1000 and 1500 series arrays using SNMP traps and OpsMgr 2007, complete the
following steps:
1. Browse to the System Management Home Page of the P2000/MSA management server where
HP Insight Management Agents have been installed.
2. Click on the Settings Tab.
3. Click on SNMP and Agent Settings.
4. Click on Trap to add the trap destination.
5. Add the IP and community string settings of the OpsMgr server.
6. Click Apply.
After successfully completing these steps the P2000/MSA traps will be forwarded to OpsMgr server.
Monitoring SNMP traps for P2000/MSA series arrays
To monitor P2000/MSA series arrays using SNMP traps and OpsMgr 2007, perform the following
steps:
1. Login to the P2000/MSA array's CLI using SSH.
For more information about this process, see the P2000/MSA user documentation.
HP Storage Management Pack for System Center User Guide 47