HP StorageWorks P9000 Application Performance Extender Software User Guide (5697-0984, September 2012)

NOTE:
On a HP-UX host, do not remove the communication agent using the swremove option.
Removing communication agent on a Windows host
To remove the communication agent on a Windows host:
1. Select Start > Control Panel >Add/Remove Programs.
2. Select HP StorageWorks P9000 Application Performance Extender Communication Agent.
The InstallAnywhere window appears, indicating that it will remove the selected software.
3. Click Next.
Removing the controller
IMPORTANT:
During the removal of the controller, you will be prompted to confirm the removal of RMLIB. If RMLIB
is used by other applications such as P9000 Host Agent, do not remove RMLIB.
Removing the controller on HP-UX and Linux hosts
1. Using the command line interface, navigate to the following location:
cd /opt/Hewlett-Packard/apex/controller/Uninstall_APEXController
2. Run the ./Uninstall_APEXController command.
NOTE:
Do not remove the controller using the swremove option.
Removing the controller on a Windows host
1. Select Start > Control Panel >Add/Remove Programs.
2. Select HP StorageWorks P9000 Application Performance Extender Controller.
The InstallAnywhere window opens, indicating that it will remove the selected software.
3. Click Next.
Installing and removing P9000 Application Performance Extender26