HP StorageWorks P9000 Application Performance Extender Software User Guide (5697-0984, September 2012)

Figure 11 Discovered hosts table
.
2. Click Refresh Host List to view the latest set of discovered hosts.
3. Select a host to collect configuration data.
You can also select multiple hosts. Select Select All Hosts to collect configuration data for all the
discovered hosts, or Select Hide Offline Hosts to view and collect configuration data only for the
online hosts.
4. Click Collect Configuration Data to collect configuration data for the selected hosts.
The array (XP and P9500) details are displayed under Array-Host Connectivity in the Navigation
pane, as shown in Figure 12.
Figure 12 Array host connectivity details
.
5. Click Next.
The Controller Settings screen is displayed.
Alternatively, you can select Controller Settings from the Navigation pane. For more information
on specifying controller settings, see “Specifying controller and command device set-
tings” on page 55.
Specifying controller and command device settings
This section describes the procedure to assign controllers to arrays.
Controller Settings screen
The Controller Settings screen is displayed when you select Controller Settings under Configuration
in the Navigation pane.
HP StorageWorks P9000 Application Performance Extender Software User Guide 55