HP StorageWorks P9000 Application Performance Extender Software User Guide (5697-0984, September 2012)

Figure 36 Alarms screen (Alarm Configuration)
.
DescriptionItem
Enables you to create, update, and remove alarms.Alarm Configuration
Displays the details of the alarm conditions met for the existing alarms in
the system.
Alarm History
Displays the source of the alarm. The source can be one of the following:
• APEX system
• Communication agent
• APEX controller
• Management station
Source
Displays the IP address of the alarm source.Source Address
Displays the event of the alarm. Events can be of the following types:
• SLO violation
• Availability
Event
Displays the state of the event.State
Displays the deviation amount in percentage.Deviation
Displays the severity level of the alarm. The severity levels are:
• INFORMATIONAL
• WARNING
• ERROR
• CRITICAL
Severity
Displays the notification type as EMAIL.Notification
Using P9000 Application Performance Extender84