HP StorageWorks P9000 Application Performance Extender Software User Guide (5697-0984, September 2012)

Figure 38 Alarm History screen
.
Filtering alarm records
You can filter the alarm details based on the following:
• Source
• Event
• Notification
• Severity
• Status
NOTE:
Filtering can be toggled on or off by selecting or clearing the Disable Filter check box.
To filter alarms:
1. On the Alarm window, do one of the following:
a. Select a source from the Source list to filter alarms based on the source of the alarm.
b. Select an event from the Event list to filter alarms based on the event type.
c. Select a notification type from the Notification list to filter alarms based on the notification
type.
d. Select a severity level from the Severity list to filter alarms based on the severity level.
e. Select a status from the Active list to filter alarms based on the alarm status.
2. Clear the Disable filter check box.
The filtered data is displayed in the Alarms table.
HP StorageWorks P9000 Application Performance Extender Software User Guide 87