Hitachi Dynamic Link Manager Software Users Guide for AIX

The hdlm_license file is automatically deleted after the upgrade
installation of HDLM is completed normally. Go to step 6.
4. Mount the file system of an already created standby BOS, and then store
the license key you prepared. Create the /bos_inst/var/DLM directory,
and then, in this directory, create the license key file (dlm.lic_key).
Then unmount the file system of the standby BOS.
The following is an example of executing the command when the license
key is 123456789ABCDEF.
# multibos -Xm
# mkdir /bos_inst/var/DLM
# echo "123456789ABCDEF" > /bos_inst/var/DLM/dlm.lic_key
# multibos -Xu
The dlm.lic_key file is automatically deleted after the upgrade
installation of HDLM is completed normally. Go to step 6.
5. Mount the file system of an already created standby BOS, and then store
the license key file you prepared. Store the license key file with the name
hdlm_license in the /bos_inst/var/tmp/ directory. Then unmount the
file system of the standby BOS.
The following is an example of executing the command:
# multibos -Xm
/bos_inst/var/tmp/hdlm_license
# multibos -Xu
The hdlm_license file is automatically deleted after the upgrade
installation of HDLM is completed normally. Go to step 6.
6. If you install HDLM as an installation bundle, create a bundle file
containing the HDLM syntax. The following is an operation example of
adding the HDLM syntax to a bundle file named /tmp/hdlm_bandle:
# echo "I:DLManager.mpio.rte" > /tmp/hdlm_bandle
7. Insert the DVD-ROM, and then mount it.
This step is not necessary when you install HDLM from a directory to
which you have copied the contents of the DVD-ROM.
8. Execute the following commands to perform an upgrade installation of
HDLM.
When performing an upgrade installation of HDLM at the same time as
creating a standby BOS
• An example of executing the command to install HDLM from the
DVD-ROM or the directory to which the contents of the DVD-ROM
have been copied:
# multibos -Xs -a -l name-of-the-directory-to-which-the-
DVD-ROM-is-mounted-or-the-contents-of-the-DVD-ROM-have-
been-copied/HDLM_AIX
• An example of executing the command to install HDLM as an
installation bundle from the DVD-ROM or a directory to which the
contents of the DVD-ROM have been copied:
# multibos -Xs -b name-of-the-bundle-file-in-which-the-
HDLM-syntax-is-written -l /name-of-the-directory-to-
Creating an HDLM Environment
3-55
Hitachi Dynamic Link Manager (for AIX) User Guide