Hitachi Dynamic Link Manager Software Users Guide for AIX

• Dynamic I/O path control
• Displaying the physical storage system information
• Error log collection level
• Trace level
• Error log file size
• The number of error log files
• Trace file size
• The number of trace files
• Audit log data collection
• Audit log facility
• Number of times the same path can be used for load balancing
• Number of times the same path can be used for extended load balancing
For details on how to set up each function, see
set (Sets Up the Operating
Environment) on page 6-18.
For example, to set up the error log collection level, execute the dlnkmgr
command's set operation with the -ellv parameter specified. When the
confirmation message is displayed, enter y to execute, or n to cancel the
command.
The following shows an example in which the command is executed:
# /usr/DynamicLinkManager/bin/dlnkmgr set -ellv 1
KAPL01049-I Would you like to execute the operation? Operation name
= set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation name =
set, completion time = yyyy/mm/dd hh:mm:ss
#
To check whether the settings have been applied, see Viewing the Operating
Environment on page 4-10.
Viewing License Information
This section explains how to display license information.
To display license information, execute the dlnkmgr command's view
operation with the -sys and -lic parameters specified.
The following shows an example in which the command is executed:
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -lic
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
#
For details on the displayed items and their descriptions, see
view (Displays
Information) on page 6-34.
HDLM Operation
4-11
Hitachi Dynamic Link Manager (for AIX) User Guide