Hitachi Dynamic Link Manager Software Users Guide for AIX

Displays the format of the set operation.
Example
The following example shows how to display the format of the set
operation:
# /usr/DynamicLinkManager/bin/dlnkmgr set -help
set:
Format
dlnkmgr set { -lb on [ -lbtype { rr | exrr | lio | exlio
| lbk | exlbk } ]
| -lb off
| -ellv ElogLevel
| -elfs ElogFileSize
| -elfn Number-Of-ElogFiles
| -systflv TraceLevel
| -systfs TraceFileSize
| -systfn Number-Of-TraceFiles
| -pchk on [ -intvl Interval-Time ]
| -pchk off
| -afb on [ -intvl Interval-Time ]
| -afb off
| -iem on
[ -intvl Error-Monitor-Interval ]
[ -iemnum Number-Of-Times ]
| -iem off
| -lic
| -audlog on
[ -audlv AudlogLevel ]
[ -category Category-Value ]
| -audlog off
| -audfac { Facility-Name | Facility-Number }
| -lbpathusetimes Number-Of-PathUseTimes
| -expathusetimes Number-Of-ExPathUseTimes
| -dpc { on | off } [-pathid AutoPATH_ID { -
lu | -storage } ]
| -dpcintvl Dpc-Interval
| -pstv { on | off }
}
[-s]
Valid value
ElogLevel { 0 | 1 | 2 | 3 | 4 } (Default
Value 3)
ElogFileSize { 100 - 2000000 }(KB) (Default
Value 9900)
Number-Of-ElogFiles { 2 - 16 }(Files) (Default
Value 2)
TraceLevel { 0 | 1 | 2 | 3 | 4 } (Default
Value 0)
TraceFileSize { 100 - 16000 }(KB) (Default
Value 1000)
Number-Of-TraceFiles { 2 - 64 }(Files) (Default
Value 4)
Interval-Time { 1 - 1440 }(Minute) (Default
Value 30)
(pchk)
Interval-Time { 1 - 1440 }(Minute) (Default
Value 60)
(afb)
Command Reference
6-33
Hitachi Dynamic Link Manager (for AIX) User Guide