Hitachi Dynamic Link Manager Software Users Guide for AIX

Table Of Contents

Execute the following command, as applicable, to check the runtime

version:

For AIX 5L V5.3:

# lslpp -L xlC.aix50.rte

For AIX V6.1

# lslpp -L xlC.aix61.rte

For AIX V7.1

# lslpp -L xlC.aix61.rte

• HTC_ODM 5.0.52.1 or later

If you are using the following storage systems, use HTC_ODM 5.0.52.1 or

later:

Hitachi AMS2000/AMS/WMS/SMS series

Hitachi USP series (excluding the XP series)

Lightning 9900V series (excluding the XP series)

Thunder 9500V series

Universal Storage Platform V/VM series (excluding XP20000 and

XP24000)

Hitachi Virtual Storage Platform

VSP G1000

HUS100 series

HUS VM

Note:

When you install HTC_ODM in an HDLM environment where XP_ODM

has already been installed, install HTC_ODM, and then re-install

HDLM.

• XP_ODM 5.0.52.1 or later

If you are using the following storage systems, use XP_ODM 5.0.52.1 or

later:

XP series

P9500

HP XP7

Note:

When you install XP_ODM in an HDLM environment where HTC_ODM

has already been installed, install XP_ODM, and then re-install HDLM.

• JDK required for linkage with Global Link Manager

To link with Global Link Manager, make sure that JDK package 1.4.2 (32-

bit version) or later, JDK package 5.0 (32-bit version) or later, JDK

package 6.0 (32-bit version) or later, or JDK package 7.0 (32-bit version)

or later is already installed on the host. The JDK does not need to be

installed if linkage with Global Link Manager is not used. When HDLM is

installed in an environment in which the JDK has not been installed, the

KAPL09241-W message is displayed. If linkage with Global Link Manager

Creating an HDLM Environment

3-5

Hitachi Dynamic Link Manager (for AIX) User Guide