Hitachi Dynamic Link Manager Software Users Guide for VMWare

dlnkmgr [Host-Connection-Options] online [-path]
-cha -pathid AutoPATH_ID [-s]
dlnkmgr [Host-Connection-Options] online [-path] -pathid
AutoPATH_ID [-s]
dlnkmgr [Host-Connection-Options] online [-path]
-hbaportwwn HBA_Port_WWN [-s]
dlnkmgr [Host-Connection-Options] online [-path] -hapath
[-lu -pathid AutoPATH_ID] [-s]
dlnkmgr [Host-Connection-Options] online [-path] -dfha [-
lu -pathid AutoPATH_ID] [-s]
Host-Connection-Options:
[ -a | --passthroughauth ]
[ -c CONFIG | --config=CONFIG ]
[ -f SESSIONFILE | --sessionfile=SESSIONFILE ]
[ -h VIHOST | --vihost=VIHOST ]
[ -p PASSWORD | --password=PASSWORD ]
[ -r URL | --url=URL ]
[ -s SERVER | --server=SERVER ]
[ -t CACERTSFILE | --cacertsfile=CACERTSFILE ]
[ -u USERNAME | --username=USERNAME ]
[ --credstore=CREDSTORE ]
[ --passthroughauthpackage=PASSTHROUGHAUTHPACKAGE ]
[ --portnumber=PORTNUMBER ]
[ --protocol=PROTOCOL ]
[ --savesessionfile=SAVESESSIONFILE ]
[ --servicepath=SERVICEPATH ]
Valid value
AutoPATH_ID { 000000 - 999999 }(Decimal)
KAPL01001-I The HDLM command completed normally. Operation
name = online, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Reference
Using the view operation together with standard OS commands enables you
to filter the path information listed for a specific CHA port. For details about
the view operation, see
view (Displays Information) on page 6-25.
We recommend that you use the following command and verify the
information on the target paths before you execute the online operation to
place online all the paths connected to a specific CHA port.
Example
The following example shows how to filter and display the information on
all paths that pass through the CHA port 0A of the Hitachi AMS series:
dlnkmgr view -path -stname | find "AMS" | find "0A"
The above command will display information pertaining to only those
paths that pass through the specified CHA port.
Command Reference
6-15
Hitachi Dynamic Link Manager (for VMware®) User Guide