Hitachi Dynamic Link Manager Software Users Guide for VMWare

set (Sets Up the Operating Environment)
The dlnkmgr command's set operation sets the HDLM operating
environment.
Format
To Set the Host Operating Environment
dlnkmgr [-s host-name -u user-name -p password] set
{-lb on -lbtype {exrr|exlio|exlbk|vmwmru|vmwrr}
|-iem {on [-intvl error-monitoring-interval] [-iemnum number-
of-times-error-is-to-occur]|off}
|-expathusetimes number-of-path-use-times
|-dpc {on|off} [-pathid path-ID -lu|-pathid path-ID -storage]
|-dpcintvl checking-interval
}
[-s]
To Set the Remote Management Client Operating Environment
dlnkmgr -l set
{-lic
|-audlog {on [-audlv audit-log-data-collection-level] [-
category [[ss] [a] [ca] [all]]|off}
|-pstv {on|off}
}
[-s]
To Display the Format of the Set Operation
To display the format of the operation for both a host and remote
management client:
dlnkmgr set
-help
To display the format of the operation for a host:
dlnkmgr -s
host-name -u user-name -p password set
-help
To display the format of the operation for a remote management client:
dlnkmgr -l set
-help
6-16
Command Reference
Hitachi Dynamic Link Manager (for VMware®) User Guide