Hitachi Dynamic Link Manager Software Users Guide for VMWare

To Display the Format of the view Operation
To display the format of the operation for both a host and remote
management client:
dlnkmgr view
-help
To display the format of the operation for a host:
dlnkmgr -s host-name -u user-name -p password view
-help
To display the format of the operation for a remote management client:
dlnkmgr -l view
-help
Parameters (To display program information)
This section describes the parameters for the view operation, in the following
order:
To Display Program Information for Hosts on page 6-27
To Display Program Information for a Remote Management Client on page
6-30
To display path information on page 6-33
To display LU information on page 6-46
To display the format of the view operation on page 6-57
To Display Program Information for Hosts
-sys [-sfunc|-expathusetimes|-satp|-rule]
Displays program information for HDLM installed on a host.
Use one of the sub-parameters (following -sys) to specify the program
information that you want to display. If you do not specify any sub-
parameters, the command displays all program information except for
SATP claim rules.
Table 6-7 Items of program information (for hosts) on
page 6-28 shows the parameters you can specify and the displayed
information.
-t
Does not display the title for each information item.
Command Reference
6-27
Hitachi Dynamic Link Manager (for VMware®) User Guide