Hitachi Dynamic Link Manager Software Users Guide for VMWare

KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 2
The following example shows how to display the number of times the
same path can be used for extended load balancing:
PROMPT>dlnkmgr view -sys -expathusetimes
Times Same ExPath Was Used : 100
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 3
The following example displays SATP information:
PROMPT>dlnkmgr view -sys -satp
SATP : HTI_SATP_HDLM
Default PSP : HTI_PSP_HDLM_EXLIO
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 4
The following example displays SATP claim rules:
PROMPT>dlnkmgr view -sys -rule
Vendor Model
HITACHI DF600F
HITACHI ^OPEN-*
HP ^OPEN-*
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To Display Program Information for a Remote Management Client
-sys [-msrv|-lic|-audlog|-pstv]
Displays program information for HDLM installed on a remote
management client.
Use one of the sub-parameters (following -sys) to specify the program
information that you want to display. If you do not specify any sub-
parameters, the command displays the version and license information for
HDLM on the remote management client.
Table 6-8 Items of program
information (for remote management clients) on page 6-31 shows the
parameters you can specify and the displayed information.
-t
Does not display the title for each information item.
6-30
Command Reference
Hitachi Dynamic Link Manager (for VMware®) User Guide