Hitachi Dynamic Link Manager Software Users Guide for VMWare

For details on the contents of each displayed item, see Table 6-14 LU
Information on page 6-51.
The sub-parameters are:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see
Table
6-6 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-22 in
Parameters on page 6-17.
-hdev host-device-name|-pathid AutoPATH_ID
Displays information only for the paths accessing the specified host
device, if the -hdev parameter is specified.
If the -pathid parameter is specified, only information about the LU
connected to the path with the specified AutoPATH_ID is displayed.
-t
Omits the title for each information item.
Example 1
The following example shows the LU information displayed when
ChaPort, LB, VmPSP, VmRuntimeName, and VmState are specified as
additional display items:
PROMPT>dlnkmgr view -lu -item cp lb vmpsp vmruntimename
vmstate
Product : SANRISE_AMS
SerialNumber : 77010152
LUs : 1
iLU HDevName LB VmPSP PathID
VmRuntimeName ChaPort Status VmState
0191 t10.HITACHI_770101520191 exlio HTI_PSP_HDLM_EXLIO 000000
vmhba2:C0:T0:L0 1B Online active
000001
vmhba5:C0:T0:L0 0B Online active
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Example 2
When using Hitachi AMS2000 series, Hitachi SMS series , or HUS100
series storage and displaying LU information with DPC added to the
display items:
Command Reference
6-49
Hitachi Dynamic Link Manager (for VMware®) User Guide