Hitachi Dynamic Link Manager Software Users Guide for VMWare

Displayed item
Description
No summary
displayed
Summary
displayed
• For Hitachi AMS2000/AMS/WMS/SMS series
and HUS100 series, indicated by a decimal
number. The entire value of iLU is the
internal LU number within the storage
system. You can identify an actual LU by
referencing iLU from the storage system
management program.
• For Universal Storage Platform V/VM series,
Hitachi Virtual Storage Platform, and VSP
G1000, indicated by a hexadecimal number.
The first two characters of iLU are the
number of the logical DKC (Disk Controller),
the middle two numbers are the CU number,
and the last two characters are the internal
LU number within the CU.
SLPR
#1
-
The number of the SLPR to which an LU belongs,
indicated by a number from 0 to 31. A hyphen
(-) is displayed if the storage logical partition
functionality for the storage system for the
target LU is not supported.
HDevName
HDevName
Host device name.
DPC -
The setting information about the dynamic I/O
path control function is displayed for each LU.
on: The dynamic I/O path control function is
enabled.
off: The dynamic I/O path control function is
disabled.
-: The dynamic I/O path control function is not
supported.
PathID
-
The AutoPATH_ID. AutoPATH_ID is assigned
every time the host is restarted.
PathName
#1
-
The path name, which indicates a path. When
you modify the system configuration or replace a
hardware item, you should check the path
names to identify the path that will be affected
by the change. Path name consists of the
following four elements, separated by periods:
• Host port number (hexadecimal number)
• Bus number (hexadecimal number)
• Target ID (hexadecimal number)
• Host LU number (hexadecimal number)
For details about each element of the path name
and its representation in VMware vSphere, see
Table 6-11 Elements of a path name on page
6-45.
ChaPort
#1
-
Port number of the CHA, which identifies the
CHA port that is mounted on the storage system.
6-52
Command Reference
Hitachi Dynamic Link Manager (for VMware®) User Guide