Hitachi Dynamic Link Manager Software Users Guide for VMWare

Displays the name of the user account that is registered on the remote
management client, as well as the Credential Store file path.
Example:
PROMPT>dlmrmcenv --output
ESXiUserName=GLMUser
CredentialStoreFilePath="C:\Documents and Settings\xxxxxxxx
\Application Data\VMware\credstore\vicredentials.xml"
KAPL20907-I The dlmrmcenv utility completed normally.
PROMPT>
-h
Displays the format for running the dlmrmcenv utility.
The installhdlm Utility for Installing HDLM
The installhdlm utility can perform a new installation, upgrade installation,
or re-installation of HDLM in the unattended installation mode. How the utility
should respond during an installation, and the HDLM function settings must
be predefined in an installation-information settings file.
You can also use this utility later to check the information that was set during
installation.
The utility is stored in the following location:
drive-containing-installation-DVD-ROM:\HDLM_VMware\DLMTools
For details about the procedure for performing an unattended installation, see
Unattended installation on remote management client on page 3-8 in
Performing a New Installation of HDLM on page 3-6.
Format
installhdlm {-f installation-information-settings-file-name | -v
| -h}
Parameters
-f
installation-information-settings-file-name
Sets the information required to perform an installation.
For details about the installation-information settings file, see Contents of
an Installation-Information Settings File on page 7-9.
-v
Displays the information that was set during installation.
If the installation was performed without using the unattended installation
functionality, the information specified in a dialog box is displayed.
Example:
7-8
Utility Reference
Hitachi Dynamic Link Manager (for VMware®) User Guide