Hitachi Dynamic Link Manager Software Users Guide for VMWare

PROMPT>installhdlm -v
installdir=C:\Program Files\HITACHI
\DynamicLinkManagerforVMware
PROMPT>
For an explanation of each display item, see Table 7-2 Keys That Can Be
Defined in the [INSTALLATION_SETTINGS] Section on page 7-9.
-h
Displays the format of the installhdlm utility.
Contents of an Installation-Information Settings File
For information about setting the installation-information settings file, see
Unattended installation on remote management client on page 3-8 in
Performing a New Installation of HDLM on page 3-6.
[INSTALLATION_SETTINGS] section
This section defines operation information for the installhdlm utility. Do not
modify any definitions of items that are not listed in
Table 7-2 Keys That Can
Be Defined in the [INSTALLATION_SETTINGS] Section on page 7-9.
The following table lists and describes the keys defined in the
[INSTALLATION_SETTINGS] section.
Table 7-2 Keys That Can Be Defined in the [INSTALLATION_SETTINGS]
Section
Key name Description
Necessity of
definition
Maximu
m
charact
er
length
#
1
New
installat
ion
Upgrad
e
installat
ion or
Re-
installat
ion
installfile_locat
ion
Specify the absolute path name of
the drive in which the installation
DVD-ROM is inserted. If this key is
omitted, the installer uses the
following folder:
drive-containing-
installation-DVD-ROM:
\HDLM_VMware
Optional Optional 100
workdir
Specify an absolute path to an
output folder. Installation logs and
processing files are output to this
folder.
#2, #3
If this key is omitted,
Optional Optional 100
Utility Reference
7-9
Hitachi Dynamic Link Manager (for VMware®) User Guide