Hitachi Dynamic Link Manager Software Users Guide for VMWare

Before Viewing the List of Messages
This section explains the following information that is needed to locate
messages and understand the explanations in the sections from KAPL01001
to KAPL02000 on page 8-3.
• Format and meaning of the message IDs
• Terms used in the messages and message explanations
The information is explained below.
Format and Meaning of Message IDs
Each message has a message ID. The following table shows the format and
meaning of message IDs.
Table 8-1 Format and Meaning of the Message ID KAPL nnnnn-l
Format Meaning
KAPL
Indicates that the message is an HDLM message.
nnnnn Message serial number for the module
l Message level
• C: Critical
Fatal errors that may stop the system.
• E: Error
Errors that adversely affect the system. This type of error can be avoided
by performing a failover or other countermeasures.
• W: Warning
Errors that enable the system to continue but, if left, might cause the
system to improperly operate.
• I: Information
Information that simply indicates the operating history when the system
is operating normally.
Terms Used in Messages and Message Explanations
The following table shows the terms that appear in messages and the terms
that are used for explanation (meaning, description, and handling) of the
messages.
Table 8-2 Terms Used in the Messages and Message Explanations
Terms Meaning
aa...aa Variable (If a message contains two or more variables, they are
displayed as bb...bb, cc...cc, and so on.)
Operation name The operation name that is input after dlnkmgr in the command.
8-2
Messages
Hitachi Dynamic Link Manager (for VMware®) User Guide