Hitachi Dynamic Link Manager Software Users Guide for VMWare

Message ID Message Text Explanation
KAPL01083-I There is no license key file. File
name = aa...aa
Details
There is no license key file in the
designated folder:
aa...aa: Windows-installation-
destination-drive-name
\hdlm_license
Action
When the message that prompts
you to enter the license key is
displayed, enter the license key.
Alternatively, cancel the HDLM
command, store the license key
file directly under the Windows
installation-destination drive, and
then re-execute HDLM command.
KAPL01084-W An attempt to delete the license
key file has failed. File name =
aa...aa
Details
aa...aa: Windows-installation-
destination-drive-name
\hdlm_license
Action
If a license key file exists, delete
it.
KAPL01088-W The specified parameter values
cannot be specified at the same
time. Operation name = aa...aa,
parameter = bb...bb, parameter
values = cc...cc
Details
aa...aa: view
bb...bb: Parameter name
cc...cc: Parameter values that
cannot be specified at the same
time
Action
Execute help operation-name of
the HDLM command (dlnkmgr) to
check which parameter can be
specified, and then retry. For
details on the help operation, see
help (Displays the Operation
Format) on page 6-5.
KAPL01089-E One of the following was
executed at the same time as an
HDLM command set -lic
operation: another set -lic
operation, or an update of the
license for an update
installation.
Action
Check the license by using the
HDLM command's view -sys -lic
operation. If necessary, re-
execute the HDLM command's set
-lic operation. If the same error
message is output again, contact
your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
Do not perform the following
operations:
Messages
8-15
Hitachi Dynamic Link Manager (for VMware®) User Guide