Hitachi Dynamic Link Manager Software Users Guide for VMWare

Message ID Message Text Explanation
¢
Simultaneously execute the
HDLM command's set -lic
operation with the view -sys
-lic operation.
¢
Execute the HDLM
command's set -lic
operation while the license for
an upgrade or re-installation
is being updated.
KAPL01095-E An attempt to acquire the HDLM
version information has failed.
details = aa...aa
Details
aa...aa: Code showing the reason
for the error
Action
Re-execute the command. If the
same error occurs again, execute
the DLMgetras utility for collecting
HDLM error information, acquire
the error information, and then
contact your HDLM vendor or the
company for which you have a
service contract.
KAPL01096-E An attempt to acquire the
Service Pack version information
has failed. details = aa...aa
Details
aa...aa: Code showing the reason
for the error
Action
Re-execute the command. If the
same error occurs again, execute
the DLMgetras utility for collecting
HDLM error information, acquire
the error information, and then
contact your HDLM vendor or the
company for which you have a
service contract.
KAPL01100-I aa...aa Details
This message indicates the
executed command line.
aa...aa: Executed command
Action
None.
KAPL01101-W The target HBA port was not
found. Operation name =
aa...aa
Details
The HBA having the HBA port
WWN specified in the -
hbaportwwn parameter could not
be found.
aa...aa: offline or online
Action
Use the view operation of the
HDLM command (dlnkmgr view -
path -hbaportwwn) to check the
8-16
Messages
Hitachi Dynamic Link Manager (for VMware®) User Guide