Hitachi Dynamic Link Manager Software Users Guide for VMWare

Message ID Message Text Explanation
Note: All paths of the LU,
including non-P-VOL paths, will be
set to Online or Online(D).
Action
To set to Online or Online(D) all
paths that are connected to the
LU that has the specified path ID,
enter y. To cancel the process,
enter n.
KAPL01169-I All Online(S) or Online(D)
paths will be set to Online. Is
this OK? [y/n]:
Details
All paths in the Online(S) or
Online(D) status will be set to
Online because no path is
specified. To continue, enter y. To
cancel the operation, enter n.
Action
To execute online processing,
enter y. To cancel the operation,
enter n. Before you execute the
processing, you must check the
path status by executing the view
operation of the HDLM command
dlnkmgr.
KAPL01170-I All Online(S) or Online(D)
paths that are connected to the
LU that has the specified path ID
will be set to Online. Is this OK?
[y/n]:
Details
All paths in the Online(S) or
Online(D) status for each
specified LU will be set to Online.
To continue, enter y. To cancel
the operation, enter n.
Action
To set to online the all Online(S)
or Online(D) paths that are
connected to the specified LU with
path ID, enter y. To cancel the
operation, enter n.
KAPL01171-I The target paths are already
aa...aa or bb...bb.
Details
The specified paths are already in
the Online, Online(S), or
Online(D) status as a result of an
online operation.
aa...aa: Online or Online(S)
bb...bb: Online(D) or Online(S)/
Online(D)
Action
Check path status by using the
view operation. For Online(S) or
Online(D) paths: To change the
status of a path from Online(S)
or Online(D) to Online, re-
Messages
8-25
Hitachi Dynamic Link Manager (for VMware®) User Guide