Hitachi Dynamic Link Manager Software Users Guide for VMWare

KAPL04001 to KAPL05000
Message ID Message Text Explanation
KAPL04001-I HDLM manager started. Action
None.
KAPL04002-E Could not start the HDLM
manager.
Details
The HDLM manager failed to start
because the current environment
is unsuitable for the HDLM
manager to run in.
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2.
KAPL04003-E The startup parameter is invalid. Details
The HDLM manager internal
parameter is invalid.
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2.
KAPL04004-I HDLM manager will now
terminate.
Action
None.
KAPL04005-E Cannot connect the service
control manager.
Details
HDLM manager could not start
normally because it was unable to
connect the service control
manager.
Action
The HDLM manager starts as a
service and as such, to start HDLM
from the command line, use the
net start DLMManagerVM
command.
8-28
Messages
Hitachi Dynamic Link Manager (for VMware®) User Guide